Users / service manual for Scanomat Top Juicer
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • www.scanomat.dk
12
Daily cleaning:
Caution:
Before starting the cleaning procedure make sure that the equipment is switched off in order to
avoid damages and injuries with electrical parts. Make sure to switch the machine off at the machine
ON/OFF switch (see point C on the General Drawing). Please note that only the low voltage control
circuit will be cut off by this switch, if the internal covers are removed there will still be mains voltage
to the required circuits, compressors etc. Open the small door.
Cleaning:
Prepare rinsing agent: Fill rinse bucket with 2 litters of hot water, and ad two cleaning tablets. When
dissolved the rinsing agent is ready. Place the rinse bucket on top of the machine, with the outlet facing
down.
Close juice taps (clockwise)
Press the grey lock
Remove the concentrate
tubes and Bag- in-Boxes.
Connect the clean-connectors.
Release the lock on the mixers.
Lift the mixers out from the
and open the taps.
connectors.
Turn the upper part clockwise,-
Push the two parts together
Clean the nozzle holes with
pull apart, and clean in hot water.
and turn counter clockwise.
the small brush.
