Users / service manual for Scanomat Top Juicer
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • www.scanomat.dk
19
Place a carafe under the proper dispensing outlet. If more than one outlet is available, a graphic on the
front of the machine will show which selections correspond with which outlets. Press either of the
carafe keys, the display will show:
2 being the number of cups programmed for the carafe key. Size of the carafe can be adjusted by
pressing
↑
or
↓
or be repeating the carafe key press.
While brewing the display will show the name of the selected drink and the number of cups left for
this carafe.
Pressing STOP or NO any time during a carafe brew will terminate the dispensing
Dispensing PRIME selections:
The unit is equipped with a PRIME function. This is designed to prime the pumps and mixing system
after either change of concentrate box or after a CLEAN procedure. Press the PRIME pre-selection and
the display will show
Pressing a selection key will now PRIME the corresponding selection by running the dose motor at full
speed for a short period.
Service key mode:
The machine
may
be locked out form normal use of the programming / adjusting features. If this is the
case, open this pressing the small carafe, the prime and the stop key simultaneously. Display will
briefly show:
:
The service key mode will automatically time out after 30 seconds, if the machine is left untouched.
