Users / service manual for Scanomat Top Juicer
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • www.scanomat.dk
9
Service and repair is only to be carried out by service engineers educated by Scanomat.
The equipment is to be secured additionally in accordance with regulations.
The equipment must be earth connected (yellow/green conductor).
Note:
If the supply cable (power cord) has been damaged, please note that only a maintenance engineer
recommended by the manufacturer is to renew it, as special tools are required.
Earth conductor:
yellow/green
Neutral conductor: blue
Phase:
brown or black
Note:
Place the equipment in a stable position, adjust the levelling feet until the unit is level from front to back
and side to side. Be certain the levelling feets are in contact with the table to prevent rocking of the unit.
If there is a danger of the unit falling down from its position, it must be bolted, (unscrew the levelling
feets and fasten by screwing through the mounting plate).
Note:
The equipment requires ventilation. Therefore there must be a minimum of 50 mm from the backside,
and from the left hand side of the unit to the wall. The grating must be inspected frequently and vacuum-
cleaned. If the installation site/environment is especially dusty there must be vacuum-cleaned each
month.
Note:
Before connecting the equipment draw off some buckets of water (to clean the pipes and to avoid a
disagreeable taste). This procedure is also recommended when the equipment has not been operating for
some time.
Note:
We recommend that the equipment be switched on permanently due to the ventilation system among
others.
Note:
The A-weighted noise pressure level of this appliance is less than 70 dB.
