SCANMASKIN Scan Combiflex 700, User Manual

Page: 8 / 56

Scan Combiflex 700 – Manual
Chapter 1
- 2 -
1 Specifications
The SC-700 is available with different power inputs and some options regarding wet grinding. This
is described in the different sections later on in this chapter.
1.1 Electrical specifications
To find the specifications that apply to your machine, check the information plate on the electrical
cabinet door.
Never connect the SC-700 to any other voltage or number of phases than described in this
specification.
The power source must be fused according to “External fuse” in this specification; also the
cables used must be marked and rated in accordance with the fuse used. Failure to comply
with the correct fuses may cause fire or injuries.
Power choice
1
400 V 3~
2
400 V 3~ 230 V 3~
Power 7.5 kW (10 hp) 11 kW (15 hp) 7.5 kW (10 hp)
Current 16 A 32 A 32 A
Voltage
380 – 400 V 3~ 380 – 400 V 3~ 200 – 240 V 3~
Frequency
50/60 Hz ± 5% 50/60 Hz ± 5% 50/60 Hz ± 5%
External fuse
3
16 A 25 A 30 A
Power inlet
4
IEC 60309
3P+N+E 400V
16A IEC 60309
3P+N+E 400V
16A IEC 60309 3P+E
250V 16A
Table 1-1 Electrical specifications
All models are CE-marked.
If using a generator see “2.6.2 Using a generator”
1
This refers to different power choices. Note that a SC-700 made for one choice of power must be used with the particular
choice.
2
Standard
3
Maximum current for the fuses used in the power source (i.e. the distribution box) .
4
This is the standard inlet used. Machines sold outside of EU will be shipped either with a local standard inlet or an adapter.