SCANMASKIN Scan Combiflex 700, User Manual

Page: 11 / 56

Scan Combiflex 700 – Manual
Chapter 1
- 5 -
1.4 Range of application
SC-700 is exclusively designed to process horizontal surfaces. SC-700 must not be used for
other purposes than stated in this user guide. The manufacturer will not be liable for
damage or injury resulting from incorrect usage of SC-700. Failure to follow the directions
in this user guide will void the warranty.
Typical applications
Removal of old coatings, carpets, putty from hard surfaces
Removal of undulated concrete surfaces
Preparation of the surface for coatings
Polishing of the surface
Removal of coating defects
Removal of glue residues
1.5 Scope of supply
The following parts are included with the standard SC-700 grinding machine:
Key to electrical cabinet
Remote control
Two batteries for the remote control
Battery holder for the remote control
Battery charger for the remote control
User guide
Machines sold outside of Europe will be either equipped with a local standard connector for the
power inlet or the mating connector will be included and fitted at the main power inlet.
Read “2.6
Electrical safety” before connecting any included connectors .