SCANMASKIN Scan Combiflex 700, User Manual

Page: 32 / 56

Scan Combiflex 700 – Manual
Chapter 4
- 26 -
4.8 Water connection
Closed
– No water will flow
Open
– Water will flow
4.9 Changing tools
Before changing tools, read “ 2.8 Safety regarding maintenance
”.
This illustration shows how to change the Scan-On tools.
Figure 4-5 How to fit the diamond segments on the Scan-On plate
1. Insert the segment at the widest part of the slot
2. Push the segment outwards
3. The segment is now fit on the Scan-On plate
To make sure that the segment is secured, use a small plastic hammer and slightly hit the segment
outwards. In reverse this technique can be used to loosen segments that are stuck.
4.10 Using with generator
The generator must be equipped with protective earth and operated in accordance with the
current EN-VDE directives (this applies to the protective earth conductor in particular) in
order to ensure that all safety devices are functioning and eliminate possible damage to
electrical components.