Scan Combiflex 1000 – User Guide
Chapter 4
- 21 -
SCANMASKIN
SW
ED
EN
A
B
MACHINES-MINERALS-KNOW-HOW
4.5
Operation from control panel
4.5.1
Selecting control panel
Set the “RADIO ON /OFF” switch (4) to “OFF”.
Restart the joystick according to “
4.5.7.4 Start up
”.
4.5.2
Start up
Read ”
4.1 Precautions
” before starting the machine.
Make sure that the power plug and hoses for dust collector and water (if used) are connected to
the machine.
Turn on the dust collector if used.
Make sure that the “EMERGENCY STOP” button (8) is in its upper position. If not, release it
by turning it clock wise until it rises and press the “STOP” (9) button once to reset.
Press the “START” button (5).
4.5.3
Stop
Press the “STOP” button (9).
Wait for the machine to come to a complete stop.
Turn off the dust collector if used.
4.5.4
Emergency stop
When pushing the “EMERGENCY STOP” button (8) the machine will quickly stop.
To reset from an emergency stop, release the “EMERGENCY STOP” button (8) by turning it
clock wise until it rises. Reset the machine by pressing the “STOP” button (9) once. The machine
can now be started again according to “
4.5.2 Start up”.
4.5.5
Adjusting grinding speed
Turn the “SPEED” knob (7) clock wise to increase the grinding speed and counter clock wise to
decrease it. See “
1.2 Mechanical specifications
” for the rotation speed range.
4.5.6
Change grinding direction
Use the “L/R” switch (3) to select grinding direction. The machine will automatically come to a
complete stop and restart in the selected direction
