Scan Combiflex 1000 – User Guide
Chapter 4
- 18 -
SCANMASKIN
SW
ED
EN
A
B
MACHINES-MINERALS-KNOW-HOW
4
Operation
4.1
Precautions
Any machine, if it is not used according the regulations, may be hazardous for operating,
setting-up and service personnel. The operating authority is responsible for compliance with
the safety regulations during operation and maintenance, and for the use of safety devices
supplied with the machine, as well as the provision of appropriate additional safety devices!
Never operate the machine without proper tools.
Eye and ear protection must be worn at all times.
Never operate the machine when its not in its upright position.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don’t use the machine
if there are any foreign objects stuck into the surface. Such objects must be removed prior to
operation of machine.
Read “2
Safety Regulations
” before operating the machine.
4.2
Operation of machine
The gear barrel has got four grinding heads that rotates in the opposite direction of each other and
the gear barrel itself is rotating in one direction. Each grinding head is equipped with a Scan-On
plate where each plate holds the tools used.
The machine can be operated from both the control panel and from a remote control. There are
also two modes of transportation, manually or assisted drive.
