© Scania CV 2011
47
19. Daily:
Check for leaks, rectify as necessary
- Start the engine.
- Check for oil, coolant, fuel, air and exhaust leaks.
- Tighten or renew leaking connections. Check the overflow holes (1) in
the block which show whether the O-rings between the cylinder liners
and crankcase are leaking, see figure.
a) If coolant is running out, the O-ring is leaking.
b) If lubricating oil is running out, the liner shelf is leaking.
- Check that there are no leaks from the coolant pump. If there is a leak,
renew the pump seal or the complete coolant pump.
- A small amount of leakage from the overflow holes during the engine
running-in period is normal. Sealing rings and O-rings are lubricated
with soap or oil when fitted.
- This leakage normally stops after a time.
Take care to ensure that any
leaks do not cause pollution.
If serious leakage occurs,
contact your nearest Scania
workshop.
Important
!
Help protect our
environment!
