12
Manual Cook Mode
1) Pressing the
”TIME/ENTRY“-
pad will cause to the oven to
begin Manual Cook Mode.
2) During this mode, remaning cooking time displays. The fan
and oven lamp will work.
3) When cooking program finish, the oven will enter End of
Cook Cycle Mode.
If you press “
STOP/RESET”
, button under this mode, the ov-
en will enter Pause Mode.
End of Cook Cycle Mode
1) After the time has expired in a Manual Cook Mode, or a Pre-
set Program Cook Mode, the oven shall go into The End of
Cook Cycle Mode.
2) During this mode,
“End”
displays.
3) If either User Option
“OP:11” or “OP:12”
is selected, the ov-
en shall continue to sound until the user acknowledges this
by either opening and closing the door or pressing the
“
STOP/RESET”
, pad. If User Option
“OP:10”
is selected, after
the 3 seconds beep, the oven shall go into Ready Mode.
Preset Program Cook Mode
1) This mode allows cooking of food items through a one pad
touch operation. While in Ready Mode, pressing one of ten
digit keys on the keyboard will cause the oven to run the
Preset Program associated with that key.
2) LED displays the remaining cooking time. If it is multi-stage
cooking, the total remaning cooking time displays not a par-
ticular stage cooking time.
3) When cooking program finish, the oven will enter End of
Cook Cycle Mode.
If you press “
STOP/RESET”
, button under this mode, the oven
will enter Pause Mode.
On the Fly Cooking
1) While the oven is cooking or under Pause Mode, if User Op-
tion
“OP:51”
is selected press number buttons, the preset
cooking program will start automatically.
2) LED displays the remaining cooking time.
3) When cooking program finish, the oven will enter End of
Cook Cycle Mode.
If you press “
STOP/RESET”
, button under this mode, the oven
will enter Pause Mode.
Programming Mode
This mode allows the user to assign cook times and power levels
to the once touche button.
1) Open the door and press
“1”
for 5 seconds,the buzzer will
sound once and enter to Programming Mode.
2)
“ProG”
displays.
3) Press any number, 0 to 9, and the LED will display the saved
time, then you can input the time you need.
4) Press “
HOLD 0%”, “DEFROST 20%“, “MEDIUM 50%“
or
“MED-HI 70%“
to input the power level.
LED will display the related power. If the same button
pressed twice, the power will change to PL10. If no power
chosen,
“PL10”
is default.
5) To change the cooking fators: If press
“X2”,
LED will display
“CF:XX”.
The default factor is
80%.
“CF:80”
displays. If you need to change the cooking power,
just press one of the number buttons to set.
6) After setting the time and power, press
“START“
in 30s, the
cooking program will be saved. When the program saved,
“ProG”
displays.
7) If all the cooking time exceeds the MAX. time User Option 7,
when press
“START“
to save the program, the buzzer will
sound three times briefly to tell you the time is no use. And
then LED turn back to show
“ProG”.
The time set before will
be no change.
8) Close the door, the oven will turn back to Ready Mode.
If press “
STOP/RESET”
, button during setting process, the oven
turn to Door Open Mode.
The program that not saved will be lost. If there is program saved
as memory procedure, press the related number button, the
saved program will start. If no saved program, the buzzer will
alarm when pressing number button and it will not work. For ex-
ample: set the program as memory cooking.
Program; Power level PL7 and cooking time is 1 minute and 25
seconds.
Step 1: In ready state, press number button
“1”
for 5 se-
conds
,”ProG”
displays.
Step 2: Press number button
“3”,
the program will be saved in
“3”.
Step 3: Press number buttons
“1”, “2”
and
“5”
to input the cook-
ing time. Step 4: Press
“MED-HI 70%“,
“PL7”
displays. Setting fin-
ished.
Step 5: Press
“START“
to save. When use the program next time,
just press “3”, the related program will start.
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset , just repeat the aboved steps.
3. If press “
STOP/RESET”
, at the last step, it will turn back to
Ready Mode. The setting will be no use.
Double Quantity cooking
1) Under ready state, press “X2” button and then press number
buttons 0-9 in 5 seconds, the oven will start cooking with the
quantity preset cooking time.
2) Press
“X2”,
“doub”
displays. When press number buttons,
LED will display the quantity preset time.
For example, number button “5” and its preset time is 1 mi-
nute. Then press
“X2”,
then time will change to 1:00 *
(1+0.8) = 1:48
3) When cooking program finish, the oven will enter End of
Cook Cycle Mode.
Stage Cooking Programming
This allows the user to cook food items at combination of various
Power Levels.
1) Three stages can be set at most under cooking mode or
memory mode.
After setting the power and time for the first stage, press
“TIME/ENTRY”
to set the second stage. And the same step
to set the third stage.
2) When setting the second or the third stage, press
“TIME/ENTRY”,
“S-2”
or
“S-3”
displays.
3) Press
“START“
button to start cooking.
Example:
To set three stages as memory mode. The first
stageis PL7 and time is 1 minute 25 seconds. The second
stage is PL5 and 5 minutes and 40 seconds. The steps are fol-
