36
SET-UP INSTRUCTIONS
STEP 3
Attach the handlebars (5) to the front support (4) and fasten with one clamp (25), one allen
bolt (22), one clamp cover (37) and one T-type knob (21).
Connect the upper sensor wire (33) to the sensor wire on the back of the computer (6). Insert
the handpulse wire (20) through grommet (32) on front support (4) and pull it out of front sup-
port (4). Connect the hand pulse wire (20) to the jack on the back of computer (6).
Attach computer (6) to front support (4) using four screws (27) [pre-assembled on computer].
