20
User manual SCAIME:
NU-eNodTouchM-E-0815_196774-B
3.2.3.
Communication error and disconnection
•
When an eNod4 has communication problems or is disconnected, the data from other channels freezes for 5 seconds.
During this time, a reconnection button appears, eNodTouch tries to recover the connection with eNod4.
•
After 5 seconds if eNodTouch can not recover the connection with eNod4, the button enters in the state « eNod
disconnected », the data display resumes.
•
Identify the communication problem in the following list: wiring problem (§1.4), communication parameters
misconfigured on eNodTouch or eNod4 (§2.2.3).
•
When you found out the issue, touch the « eNod disconnected » button to re-establish the communication.
•
The display module tries to recover the communication with eNod4 during 1 second, the button toggles to the
« Reconnection » state. After 1 second if data from the eNod4 appears, the communication is re-established, else the
button toggles to « eNod disconnected » state.
