manualshive.com logo in svg

Scaime eNodTouch-M, Instruction Manual

Share
Download
Scaime eNodTouch-M Instruction Manual Download Page 17

17 

User manual SCAIME: 

NU-eNodTouchM-E-0815_196774-B 

3.2.

 

Multi-eNod screens 

3.2.1.

 

 Increase eNod number 

•

 

To increase the eNod number and have an access to the multi-eNod screen, please follow the procedure :  

- Touch the Fn button of the main screen, the main menu appears.  
- Enter in the eNodTouch menu. 
- Go to the Starting Parameters screen by touching the right arrow button. 

 

 

Main Menu 

    

 

              eNodTouch Menu                                                    Starting Parameters 

•

 

By default the eNod number is 1, eNodTouch starts on the main screen of the first eNod. 

 

•

 

Increase eNod number if needed. The display module can start on the main screen of any eNod or on the multi-eNod 
screen by disabling « Starting eNod » function. 

 

•

 

If starting eNod is disconnected or have communication problems, the multi-eNod screen appears. 

 

•

 

When settings are finished, touch the left arrow button, to restart eNod Touch. 

 

•

 

According to the number of eNod settled, eNodTouch redirects to the following multi-eNod screens : 

Summary of Contents for eNodTouch-M


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands