22
SBS-3510 User’s Manual
5.7 Operation by Gestures
You can start or abort a measurement and also assign method and sample
ID to a measurement via RFID by gestures instead of key operation. To be
able to do so, enable gesture control in the setup menu (see section 6.7).
To start a measurement
• Turn the instrument to the right as shown in fig. 4, and hold the position
until the measurement starts.
Fig. 4: Instrument turned to the right
To abort a measurement
1. Turn the instrument to the left as shown in fig. 5, and hold the position
until a confirmation message appears.
Fig. 5: Instrument turned to the left
2. Confirm:
- To confirm canceling, turn the instrument to the left again as shown in
fig. 5, and hold the position until the measurement has stopped.
- To continue with the measurement, turn the instrument to the right as
shown in fig. 4.
To assign method and sample ID to a measurement via RFID
• Tilt the instrument towards you, and hold the position until “Reading Tag”
appears on the screen.
Continue as described in section 7.6.
