SBS SBS-3510 Instruction Manual And Safety Information Download Page 19

Page: 19 / 68

SBS-3510 User’s Manual

Output fields

You can select 2 or 3 sample parameters to be simultaneously displayed on

the main screen. Each parameter is shown in a separate output field.

Status bar

The status bar shows the status of the instrument or a measurement. If

applicable, a progress bar will show the progress of activities.

5.2 Key Functions

The key functions correspond to the function keys below/above the display

(the assignment of keys adapts to the active selection). The following key

functions are available:

Function Description

Back

Leaves the menu and goes to the next higher menu level.

Cancel

Aborts an operation.

Delete

Initiates deleting a value, or deletes the next character to the

left.

Done

Finishes an entry.

Edit

Switches into editing mode allowing you to enter values or

change the current selection.

Enter

Enters a character.

Live

“Unfreezes” the last measuring result and returns to showing

continuous live readings.

Opens the main menu.

New

Initiates entering a new value.

Continues with a procedure, or selects the next item to the

right.

Rejects a proposition.

Confirms a selection, or finishes a procedure.

Selects the next item to the left.

Prints the selected data.

RFID

Reads an RFID tag.

Save

Saves adjustment data.

Start

Starts a procedure.

Yes

Accepts a proposition.

Summary of Contents for SBS-3510





































































Search results

Summary of Contents for SBS-3510

Reviews:

Brands by name

Popular brands

SBS SBS-3510, Instruction Manual And Safety Information

Search results

Summary of Contents for SBS-3510

Reviews:

Brands by name

Popular brands