SBS System – SB-1000 Operation
19
2 and 3 Weight Manual Balance
1) Stop Spindle - This screen requests the operator to stop the spindle. The Stop Spindle icon flashes as a
reminder. This screen stays until the control detects that the spindle rotation has stopped.
2a) Apply Weights,
Zero Phase
- Once the spindle is stopped, this screen shows the operator how to
place the weight.
During the Zero Phase the weights must be removed or moved to the null position as shown.
2b) Apply Weights,
Test Phase
- During the Test Phase the weights are moved to a location where the effect
of one weight can be measured.
2c) Apply Weights,
Solution Phase
- The weight positions should be changed as shown to bring the balance
to a minimum. Both the three weight and 2 weights screens are shown following. Extra iterations of this
phase (called Trim Phase) may be required. Pressing
will advance to the next part of the phase, the Start
Spindle screen. The
symbol flashes as a reminder. Starting the spindle will also advance to the next
screen.
—or—
It is possible at the Solution Phases that a balance solution is
difficult to achieve, at which time one of these screens may be
displayed instead of the Solution screen.
The images depict suggestions to improve results by increasing
or decreasing the weight and/or changing the balance type
between two and three weights.
Press
button to return to the Apply Weights screen without
making any changes.
If changes are made, a new complete balance operation should
be run by pressing
.
