SplitBox
– User Manual
SPLITBOXUM.1.2
4.3. Status LED Description
Those LEDS inform you about the GNSS receiver function as well as general status display.
4.3.1. Power LED
This LED turns red when the SplitBox is powered on.
4.3.2. Satellite LED
The main behavior of this led is: green when the GNSS board has a valid position and red when
entering RTK mode.
4.3.3. Sync Out LED
This LED reflects the signal present on the Sync Out B.
Note: Please not that the default Sync Out B signal level is HIGH. If no Sync Out B signal is
configured on the Ekinox/Apogee or at startup, the signal level will thus be HIGH.
4.3.4. Network LED
The Network LED reflects the status of the Ethernet Link between the SplitBox and the user's
network. It turns green when a link is established and yellow when data is being transferred.
12/30
