SplitBox
– User Manual
SPLITBOXUM.1.2
4.2. Back face
The back face includes the connectors to connect the Ekinox/Apogee to the SplitBox as well as a DC input,
to provide power to the SplitBox and the Ekinox/Apoge.
A master power switch controls the whole system power supply. On the bottom right corner, an eight ways
configuration switch is used to change the SplitBox behavior.
Finally for SplitBox with an internal GNSS receiver, the Main and Secondary GNSS antennas can be
connected using standard TNC connectors.
4.2.1. Version Standard (STD)
On the standard version, 3 cables are used to connect the SplitBox to the Ekinox/Apogee.
4.2.2. Version Subsea (SUB)
On the Subsea version one single cable is used to connect the SplitBox to the subsea Ekinox.
11/30
