SplitBox
– User Manual
SPLITBOXUM.1.2
9.1.6. CA-AEK-SUB-SB-10M, CA-AEK-SUB-SB-20M
10 or 20 meters sub sea cable used to connect a subsea SplitBox with a
subsea Ekinox.
9.1.6.1. Cable Construction
This high quality subsea cable has a Amphenol, TVS06RF-17-35PN-
USBSB3 connector on one side and a Seacon MINIM-37#22-CCP-Ti
connector over-moulded on the other side. The 37 ways Seacon
connector is made of Titanium perfectly compatible with the Ekinox housing to ensure minimal degradation
during long time immersions in salt water.
9.1.6.2. Electrical characteristics
General Minimum Insulation Resistance
Rating
Core to Core
> 900 MΩ/km @ 500 V
Core to Screen
> 500 MΩ/km @ 500 V
Screen to Screen
> 10 MΩ/km @ 500 V
26 AWG Screen Twisted Paris (Signals)
Nominal Conductor Resistance
181.10 Ω/km @ 20 °C
Nominal Impedance
100 Ω
Nominal Capacitance
84 pF/m
22 AWG Conductors (Power Supply)
Nominal Conductor Resistance
59.30 Ω/km @ 20 °C
Max Recommended Voltage
500 V
9.1.6.3. Mechanical characteristics
Temperature characteristics Limits
Rating
Static Operating Temperature
+90 °C
Dynamic Operating Temperature
+80 °C
Cold Flex Temperature
-40 °C
Mechanical characteristics
Cable Length
10 / 20 meters
Cable Diameter
17 mm ± 0.30 mm
Depth Rating
500 meters
Weight In Air
267 kg/km
Weight In Sea Water
34 kg/km @ SG 1.025
Recommended Bend Radius Limits
Static
85 mm
Dynamic
160 mm
29/30
Figure 9.6 : CA-AEK-SUB-SB-10M
