Ekinox Subsea
– Hardware Manual
EKINOXSUBSEAHM.1.4
Triad
Pair/Pos
Color
Signal
Pair n°12
Blue
Port E - RS-232/RS-422 - Rx+
White
Port E - RS-422 - Rx-
Triad n°4
Pair n°13
Green
Sync In A
White
GND
Pair n°14
Orange
Sync In B
White
GND
Pair n°15
Brown
Sync In D
White
GND
Pair n°16
Blue
Sync In E
White
GND
Main cable section
-
Red
POWER VDD
Main cable section
-
Green
POWER GND
7.5.2. CA-AEK-SUB-DPT500-20M
20 meters wire ended sub sea cable depth rated for 500 meters.
Please refer to 7.5.1 CA-AEK-SUB-DPT500-10M for all technical details as the two cables are exactly the
same except the cable length.
7.5.3. CA-AEK-SUB-DPT6000-5M
5 meters wire ended sub sea cable depth rated for 6 000 meters.
7.5.3.1. Cable Construction
This high quality subsea cable is wire ended on one side and has a Seacon MINIM-37#22-CCP-Ti connector
over-moulded on the other side. The 37 ways Seacon connector is made of Titanium perfectly compatible
with the Ekinox housing to ensure minimal degradation during long time immersions in salt water.
The cable is composed of two AWG-22 thinned copper conductors for the power supply and four cable triads
for communication signals. Each triad includes four shielded AWG-26 thinned copper twisted pairs.
The following diagrams show the cable overview and internal section for better understanding:
40/42
