SBCS CHEMTROL CT Series, Instruction Manual, Page: 25 / 65

MANUAL CT Controllers
OPERATION Page 25
CHAPTER III - CONTROLLER OPERATION
This Chapter describes the operation of the CHEMTROL®
CT
Controller
. For reference, the menus and submenus are
shown in Chapter I - INTRODUCTION / Menu Tree.
Access
Each menu is accessed by highlighting a line on the Main
Display screen with the UP and DOWN arrow keys and then
entering the submenu with the RIGHT arrow key. To return to
any previous menu, press the LEFT arrow key.
Each menu is identified by a combination of numbers, from 1 to
8, corresponding to the lines that are used to access it. For
instance, Submenu 8.1.4 for Clock Setup is accessed through
line 8 on the Main Display Screen (Configuration Menu), then
line 1 (Initial Setup) and line 4 (Clock).
To facilitate startup of the controller, Menu 8 for Configuration
and Setup is discussed first in this manual. All the other
menus from 1 to 7 are discussed afterwards in numerical
order.
Default Setup
The CHEMTROL®
CT Controller
is pre-loaded with
standard defaults values for normal operating conditions. On
startup, it uses the default values, i.e. English language, U.S.
units, no password, standard setpoints and alarms, etc.
The operator can change the settings at any time. He can
revert to the original default values (partial or complete)
through the Reset Submenu 8.2.5.
All settings are maintained in case of a power shutdown as
long as the battery maintains a charge above 2.5 V. The
original default values are automatically reloaded in case of
complete loss of power (both line and battery power).
8 - CONFIGURATION MAIN MENU
Access
To access the Configuration Menu, use the DOWN arrow key
on the Main Display screen to highlight the last line and then
press the RIGHT ARROW key to show the next menu. It
includes the three submenus shown on the right (Menu 8).
CT6000
Main Display
CT3000
/
CT110
Main Display
Menu 8 - Configuration
>COND 2000 uS A
pH 8.5 pH A
ORP 750 mV X
TEMP 72 F X
FLOW 15/10 gpm A
>FILTER N.A.
ADDITIVES TSSX
06/01/12 19:06 LSI OK
CONFIGURATION
Initial Setup
Operations
Communications
>COND 2000 uS A
pH 8.5 pH A
ORP 750 mV X
TEMP 72 F
FLOW 15/10 gpm A
>FILTER 25/20 psi M
ADDITIVES TSSX
06/01/12 19:06 LSI OK