Saia-Burgess Controls AG
Manual for PCD2|3.W7x0
│ Document 26-
833 E
NG07 │ 2018-10-18
2
Programming
2-2
Function boxes
WM_Master
Ths FBox is only programmed once in a weighing application. It controls the
entire data traffic from all weighing FBoxes to all weighing modules. In the
Master Box, the data sent to the modules and the data read from the modules is
collated, checked and passed to the application. The other FBoxes are exclusively
concerned with controlling the selected scale as required by the application.
LifeFlag
This output reports that a weighing module can no longer be addressed.
Timeout
Timeout is set to “1” when the response from a weighing module is
delayed too long.
Address
Base address of the defective module
The following FBoxes are programmed once per weighing channel:
Addr
Base address of the module slot
Chan
Channel number for the module (1 or 2)
