REM-2000-00 Pro Remote – Multi Room
Copyright © 2017 Savant Systems, LLC
009-1536-00 | 171128
15
of
18
Appendix A: Network Requirements
Savant requires the use of business class/commercial grade network equipment throughout the network to ensure the reliability of communication between
devices. These higher quality components also allow for more accurate troubleshooting when needed.
Connect all Savant devices to the same local area network (LAN) or subnet as the Host. Savant recommends not implementing any type of traffic or packet
shaping in your network topology for the Savant devices as this may interfere with performance.
Network Configuration
To ensure that the IP Address will not change due to a power outage, a static IP Address such as DHCP reservation should be configured. Savant recommends
using DHCP reservation within the router. By using this method, static IP Addresses for all devices can be managed from a single UI avoiding the need to
access devices individually.
Setting DHCP reservation varies from router to router. Refer to the documentation for the router to configure DHCP reservation.
Network Changes
The Pro Remote Multi Room requires resetting network credentials after moving to a new network, changing routers, or if the IP Address range is changed in
the current router.
Reset Wi-Fi Credentials
Follow the instructions in
section 7.1 Reset Wi-Fi
to reset the Wi-Fi credentials on the remote.
