REM-2000-00 Pro Remote – Multi Room
Copyright © 2017 Savant Systems, LLC
009-1536-00 | 171128
4
of
18
1
Important Information
IMPORTANT! PLEASE READ BEFORE CONTINUING
-
The hole beside the power button on top side of the remote is a port for the built-in microphone and NOT a reset button. DO NOT insert
any objects in this hole or damage to the remote could occur.
-
The remote’s base is simply a charging station. Place the remote into its base to charge the battery whenever the battery level gets low.
-
The remote is powered by a rechargeable lithium-ion battery.
-
The remote communicates with the Savant Pro System over Wi-Fi® (802.11 b/g/n - 2.4GHz/5.0GHz). See
Appendix A: Network
Requirements
.
-
Supports WPA and WPA2 security protocols.
-
The remote does not have to be within line of sight of a device to control it.
-
The remote is a multi-room remote. If the remote can communicate with the local Wi-Fi, it can control any device from any room/zone.
-
The Remote receives software updates over the air (OTA). See the
Remote Software Updates (OTA)
section below.
-
The Savant Pro System that the remote is associated with must have a user that is registered with the Savant cloud. If there is no
registered user, the remote will default back to a local Savant User and will have limited functionality.
-
The maximum number of remotes allowed in a system depends on the number of rooms supported by the Host. Ideally, a user can add a
remote into every room in a Savant Pro System.