Sauter Italia S.p.A.
RDT921F901
| Hardware manual ver. 1.0 | Code 114RDT921E104SAU
page 20 of 38
6.3
List of configuration parameters
6.3.1
Configuration parameters of the "Info" menu
The following table shows the meaning of the configuration parameters of the "Info" menu.
PARAM.
MIN.
MAX.
M. U.
DEF.
DESCRIPTION
PROJ
parameter available in read only mode
Information on the application project (project, version and
revision)
FW
parameter available in read only mode
Information on the firmware (code, version, revision and sub-
revision)
HW
parameter available in read only mode
Information on the hardware (version, revision, generic (G) or
special (S))
SW
parameter available in read only mode
Information on the development environment (version and
revision).
SN
parameter available in read only mode
Information on the serial number and the results of the
production tests
MASK
parameter available in read only mode
Information on the mask (depends on the manufacturer's coding
system)
DATE
parameter available in read only mode
date and time of the latest compilation of the application project.
6.3.2
Configuration parameters of the "Parameters" menu
The following table shows the meaning of the configuration parameters of the "Parameters" menu.
PARAM.
MIN.
MAX.
M. U.
DEF.
DESCRIPTION
AI1
- - -
- - -
- - -
NTC
type of probe analog port 1
NI1000
=
probe Ni 1000
PTC
=
PTC probe
NTC
=
NTC probe
0-20mA
=
Transducer 0-20 mA
4-20mA
=
Transducer 4-20 mA
0-5V
=
Transducer 0-5 V ratiometric
0-10V
=
Transducer 0-10 V
PT1000
=
Pt 1000 probe
NTCK2
=
Type 2 NTC probe
NTCK3
=
Type 3 NTC probe
RESIST
=
electric resistance reading
