sauter HK-D, Instruction Manual

Page: 27 / 33

HK-D_HK-DB-BA-e-2020 27
Note:1 If the preset number of measuring groups exceeds the current offer, the current
measuring groups between them are deleted.
2. there is no difference in the sequence of deleting whether the deletion is carried out
from the first or the last measuring group, the sequence 1 to 5 or 5 to 1 can be entered.
3. the measuring group stored in the memory is reassigned after deletion.
4. if measurement data are deleted, especially small measurement groups, because
the following measurement data are to be moved up, this takes a maximum of 30
seconds.
While data is being deleted, the device must not be switched off. This can confuse all
measurement data!
Delete All
The function
【
Delete All
】
werden deletes all existing data in memory.
Deletion confirmation
Use the keys
【 】
und
【 】
wird to move the cursor to
【
YES
】
bewegt and confirm the deletion process with the key
【
ENTER
】
wird.
Use the keys
【 】
und
【 】
wird to move the cursor to
【
NO
】
bewegt and with the key
【
ENTER
】
wird the deletion process is aborted.
7.8 Browse stored data groups
Up to eight measurement groups can be displayed simultaneously with number, date
and average value per measurement group.
Use the keys
【 】
und
【 】
wird to display the previous or next page.
Press the key
【
ESC
】
wird to cancel the process.
To move the cursor to the desired line in which the details are to be viewed, first press
the key
【
ENTER
】
gedrückt.
Use the Tasten
【 】
und
【 】
wird buttons on the corresponding page to select the
desired group.
With
【
ESC
】
gelangt you go to the previous page.
Use the key
【
ENTER
】
können to display details in this group.