sauter HK-D Instruction Manual Download

Page: 26 / 33

HK-D_HK-DB-BA-e-2020

Use the keys

【】

und

【】

wird to move the cursor to

【

Memory Manager

】

bewegt.

With the button

【

ENTER

】

gelangt you can go to

【

Memory Manager

】

Menu.

If there is no data in memory, < No Memory! > appears on the display and you return
to the main menu.

Use the keys

【】

und

【】

wird to move the cursor to the desired function and then

use the key

【

ETR to select

】

bestätigt.

View from No.1 measuring group/ View from the last measuring group

【

View From No.1

】

werden the values from the first measuring group on are shown

in the memory.

【

View From End

】

werden the values from the last measuring group on are shown

in the memory.

View from the selected measuring group no.

Go to

【

View From No.

】

und and the item to be selected is shown.

Use the number key to enter the desired value.

Press

【

ENTER

】

werden to call up the memory data from the selected initial group.

Press the key

【

ESC

】

wird to cancel the process.

Deleting a selected measuring group

With the Funktion

【

Delete by No.

】

wird the number of measuring groups to be

deleted is selected.
Use the number key to enter the number.

The selected measuring group is deleted with Taste

【

ENTER

】

wird.

Press the key

【

ESC

】

wird to cancel the process.

Summary of Contents for HK-D


































Search results

Summary of Contents for HK-D

Reviews:

Related manuals for HK-D

Brands by name

Popular brands

sauter HK-D, Instruction Manual

Search results

Summary of Contents for HK-D

Reviews:

Related manuals for HK-D

Brands by name

Popular brands