22
109872
www.sauder.com/services
-
Fasten the
BOTTOM (H)
to the
OUTER END (A)
and
INNER END (B)
as shown. Use four
1--7/8” FLAT HEAD
SCREWS (X)
through the
BOTTOM
and into the pre--drilled holes in the edges of the
ENDS
.
NOTE:
Be sure the FEET (R) are facing up. Follow the diagram.
-
Next, fasten the support bracket (from the 109848 Return Kit) to the
TOP (E)
and
MODESTY PANEL (F)
as shown.
Use three
9/16” LARGE HEAD SCREWS
(from the 109848 Return Kit) through the bracket and into the pre--drilled holes
in the
TOP
and
MODESTY PANEL
.
NOTE:
The longer arm of the bracket should be fastened to the MODESTY PANEL. Use one pre--drilled
hole in the TOP and two pre--drilled holes in the MODESTY PANEL.
-
Now, finish fastening the support bracket to the
TOP (E)
and
MODESTY PANEL (F)
. There are three remaining holes
in the bracket. Turn three
9/16” LARGE HEAD SCREWS
(from the 109848 Return Kit) through these holes and into the
TOP
and
MODESTY PANEL
.
NOTE:
There are no pre--drilled holes for these three SCREWS. Use a little extra force to get
them started.
RETURN KITS ON LEFT
1--7/8” FLAT HEAD SCREW (X)
(4 used in this step)
MODESTY
PANEL (F)
TOP (E)
INNER
END (B)
OUTER
END (A)
FOOT (R)
BOTTOM (H)
Support Bracket
(from the 109848 Return Kit)
FOOT (R)
9/16” LARGE HEAD SCREW
(6 used for the bracket)
(from the 109848 Return Kit)
