19
109872
www.sauder.com/services
RETURN KITS ON LEFT
INNER
END (B)
Use two
1--7/8”
FLAT HEAD
SCREWS (X)
here.
-
Fasten the
MODESTY PANEL (F), RIGHT UPRIGHT (C),
and
LEFT UPRIGHT (D)
to the
TOP (E)
as shown.
Tighten the
TWIST-LOCK
R
FASTENERS
in the
MODESTY PANEL
and both
UPRIGHTS
.
NOTE:
You should tighten a total of eight TWIST-LOCK
R
FASTENERS in this step. The end of the
MODESTY PANEL will hang past the end of the TOP. Follow the diagram.
-
Now, fasten the
INNER END (B)
to the
MODESTY PANEL (F)
. Use two
1--7/8” FLAT HEAD SCREWS (X)
through the
INNER END
and into the pre--drilled holes in the edge of the
MODESTY PANEL
.
MODESTY
PANEL (F)
LEFT
UPRIGHT (D)
TOP (E)
RIGHT
UPRIGHT (C)
This end of the
MODESTY PANEL (F)
will hang past the end
of the
TOP (E)
.
1--7/8” FLAT HEAD SCREW (X)
(2 used in this step)
