9
109872
-
Position the
INNER END (B)
as shown.
NOTE:
Notice the location of the two holes in the middle of the INNER END.
-
Push a
SAUDER TWIST-LOCK
R
FASTENER (T)
into the indicated large holes shown in the
INNER END (B)
.
Do
not push TWIST-LOCK
R
FASTENERS into the other two large holes in the INNER END.
NOTE:
Be sure the TWIST-LOCK
R
FASTENERS are positioned exactly as shown in the enlarged
diagrams. Make sure the point is positioned as shown in the enlarged diagram. Do not
tighten the TWIST-LOCK
R
FASTENERS at this time.
NOTE:
If you need to remove a TWIST-LOCK
R
FASTENER from a hole, pull the FASTENER back out
of the hole. Pull at the front and back edges, slowly working the FASTENER out of the hole.
Make sure this point
is in this location.
Dowel end
RETURN KITS ON RIGHT
TWIST-LOCK
R
FASTENER (T)
INNER
END (B)
Do not insert
TWIST-LOCK
R
FASTENERS
into
these two holes in
the
INNER END
.
Hole
Hole
www.sauder.com/services
