7
109872
MODESTY
PANEL (F)
-
Fasten the
RIGHT UPRIGHT (C)
and
LEFT UPRIGHT (D)
to the
MODESTY PANEL (F)
as shown. Tighten
two
TWIST-LOCK
R
FASTENERS
in each
UPRIGHT
.
NOTE:
Be sure the surface with TWIST-LOCK
R
FASTENERS on the UPRIGHTS are facing out as
shown. Follow the diagram.
-
Fasten the
RIGHT UPRIGHT (C)
and
LEFT UPRIGHT (D)
to the
SHELF (G)
. Use two
1--7/8” FLAT HEAD
SCREWS (X)
through each
UPRIGHT
and into the pre--drilled holes in the ends of the
SHELF
.
-
Now, fasten four
CORD MANAGERS (S)
to the
MODESTY PANEL (F)
as shown. Use a
9/16” LARGE HEAD
SCREW (BB)
through each
CORD MANAGER
and into the pre--drilled holes in the
MODESTY PANEL
.
NOTE:
Be sure to position each CORD MANAGER as shown. Follow the enlarged diagram.
SHELF (G)
CORD
MANAGER (S)
LEFT
UPRIGHT (D)
RIGHT
UPRIGHT (C)
Surface with
TWIST-LOCK
R
FASTENERS
Surface with
TWIST-LOCK
R
FASTENERS
9/16” LARGE HEAD SCREW (BB)
(4 used for the
CORD MANAGERS
)
1--7/8” FLAT HEAD SCREW (X)
(4 used in this step)
Use two
1--7/8”
FLAT HEAD
SCREWS (X)
here.
www.sauder.com/services
