BPLV700AV
2006-12-19
Figure 1-2
Basic mounting dimensions
2
1. INSTALLATION
1.1 Mechanical installation
Mounting recommendations
: Fig. 1-1
• Process connection direction: horizontal
• Cable entry direction: from below
• Connector coupling direction, calibration
direction: horizontal
Other considerations:
• Steam should not be admitted to the
transmitter’s sensing element.
• In outdoor installations you should make
sure that water condensed from e.g. a steam
line will not freeze and, by expanding,
damage the transmitter’s sensor diaphragm.
For instance, this can be avoided by
installing heat insulation up to the sensor
diaphragm.
SATRON VG pressure transmitter
NOTE Dimensions are in millimeters
1300354152
installation with process
coupling
installation with PASVE mounting/
service valve
Figure 1-1
Recommended mounting positions
S
Z
Remote electronics, connecting cable
with protection hose, codes
L
ja
K
[Process temperature code
H
+40]
Option
L
Option
K
Hex 36
160
17
0
[Process temperature code
H
, +40 mm]
Pg9 std. housing type
H and T
M20x1.5 std. housing types
M
and
N
Clearance for
cover removal
Hex 36
Housing types H, T and M 215
Housing type N 245
100
min. 300
min. R75
60
125
11
0
Housing types H, T and M 195
Housing type N 225
100
M20x1.5 std. housing types
M
and
N
Hex 36
Clearance for
cover removal
Pg9
std. housing types
H
and
T
Ø58
Summary of Contents for VG
Page 4: ......
