9
2.4 Setting up through HART® 375 user
interface
After installing and connecting the transmitter, connect the
user interface to the transmitter. The following menu is
displayed:
Main menu
. To select the
HART Application.
Figure 2-2
375 user interface
BPLV700AV
2006-12-19
SATRON VG
pressure transmitter
2.3 Using the 375 user interface
The following menu is then displayed:
1 Measurement
2 Configuration
3 Information
4 Diagnostics
5 Review
To change the measurement unit, damping time constant
or output mod, select
Configuration
.
The following menu is then displayed:
1 Range values
2 Output
3 Tranfer function
4 General setup
To change the measurement unit, select
Range values
.
The following menu is then displayed:
1 LRV
2 URV
3 LSL
4 USL
5 Min span
6 Apply values
To change the damping time constant, select
Output
from
the
Configuration
menu.
The following menu is then displayed:
1 Damping
2 Alarm current
To change the output mode, select
Transfer function
from the
Configuration
menu.
The following menu is then displayed:
1 Lin. func
2 User function data
After these activities or if the transmitter is supplied with
the ready configuration you must correct a zero error of
the transmitter in a final installation position.
The First press
Diagnostics
and then
Sensor trim
and
then
Zero trim
The following text is then displayed :
WARN-Loop be
removed from automatic control
The final zero error correction can be done to select
ABORT
or
OK
on the display .
Summary of Contents for VG
Page 4: ......
