5
Pass the carbon ribbon from the ribbon feeder under the printer head to the
ribbon winding unit. Affix the carbon ribbon to the ribbon core with tape, wind it
several times in the direction of the arrow.
Check from sideways that the carbon ribbon is set according to the figure below.
Set the paper.
Do as described in Steps 3 to 6 of “Setting roll paper.”
6
Turn the head close lever
(purple / CLOSE ) in the
direction of the arrow, and
close the printer head.
Close the printer head tightly
until it locks.
7
• Immediately after printing, the printer head and the surrounding area are hot. When
you replace the paper immediately after printing, be careful not to burn yourself.
• If you touch the edge of the printer head with bare hands, you may be injured.
Caution
Ribbon core
Printer head
Carbon ribbon
Printer head
Head close
lever
22
サトー取説_E 04.8.17 6:22 PM ページ 22
