Notes on installation and handling
When installing and handling the printer, note the following points.
▲
Installation Tips
Place the printer in a level place
If installed in a rough
or slanting place,
quality printing will not
be available. It may
cause malfunction and
shorten the life of the
printer.
Do not place it near cranes or
compressors
Equipment using large capacity of electricity, such
as cranes and pressing machines, may cause
electric noise or undervoltage. Since it may cause
malfunction, do not place this
product near that kind of
equipment.
Use a stable platform
Use a stable platform.
Also, do not carry the
printer with the roll
paper set, and do not
rock the printer.
Avoid high heat and humidity
Do not install it in a place
where it is high in
temperature and humidity.
High temperature and
humidity may cause
malfunction.
Avoid direct sunlight
Since this product is
installed with optical
sensors, direct sunlight
may cause erroneous
operation. Ensure that the
cover is closed when
printing.
Avoid dust
Dust may deteriorate the
quality of printing.
It may not only cause
malfunction but shorten
the life of the printer.
When installing this product, note the following points.
Always connect the ground cable
If there is not a grounding facility, please have it
installed.
Supply electricity from the source
Do not supply electricity from the same power
source as electric appliances, which consume a
lot of power, such as a heater or refrigerator, or a
power source nearby. It may cause malfunction
due to undervoltage of the
power supply.
This product requires the alternator
of AC240V.
▲
Power supply
サトー取説_E 04.8.17 6:21 PM ページ d
