1
Lift up the main cover.
Do as described in Step 1 of “Setting roll paper.”
2
Lower the head open lever (purple / CLOSE ). The printer head will open.
Do as described in Step 2 of “Setting roll paper.”
Setting carbon ribbon
For the carbon ribbon for this printer, please use our genuine products.
Do not use other carbon ribbons than the international standards.
Put in a carbon ribbon in the
ribbon feeder.
Push it inwards all the way.
(Ensure that the roll is in the
right direction.)
Carbon ribbon
Ribbon feeder
Direct winding
3
Close the main cover.
Do as described in Step 8 of “Setting roll paper.”
10
When closing the main cover, be careful not to have your fingers caught.
Caution
18
サトー取説_E 04.8.17 6:22 PM ページ 18
