SATO CT 412i, Operator'S Manual

Page: 54 / 73

Unit 4: Printer Configuration
CT4i Operator’s Manual
4-17
4.6 ADJUSTMENT OF STOP POSITION FOR CUTTER, PEEL OFF AND TEAR-OFF MODES
You can use potentiometer VR1 (with DSW set to OFF) for adjusting the label stop position when
options such as Cutter, Dispenser, Tear-off, etc, are installed. Adjustment range is by +/- 3.75 mm, as
shown below.
Note:
When DSW6 is ON, no adjustment of reference position is allowed.
1. tion is at the desired location on the label.
2. Press the FEED button to stop printing.
Note:
Adjusting the Label Pitch with VR1 will affect the stop position of the label and the cut/tear-off posi-
tions.
Reference position for printing
Cut position
Label feed direction
+
Adjustment
zero
Adjustment
-
Adjustment
Adjustment of Reference Position for Cutting