SATO CT 412i, Operator'S Manual

Page: 52 / 73

Unit 4: Printer Configuration
CT4i Operator’s Manual
4-15
During the process, the following LED and Buzzer states may be observed:
Notes:
• Connection to the host computer will be established via the active interface (standard/extended).
• First bring the printer into "Waiting for boot data transfer mode" before downloading.
• Downloaded application program will be enabled at the next power on after executing factory clear (All clear).
• To exit font download mode, make sure that it is in "Waiting to receive data" mode before turning the power off.
• Confirm that the download has terminated successfully, by checking the monitor of the printer tool, and by checking the
post-download printer program information.
• Check the system version of printer, performing a factory test print.
4.4.9 Partial Cut Compatibility Mode (DSW1-3=ON)
For further details refer to Page 4-4..
4.4.10 Head Check (DSW5 and DSW7)
For further details refer to Page 4-5.
Function ONLINE ERROR BUZZER
LED
Display
During download mode ON OFF 1 beep 1
Wait to receive data ON OFF - 1
During data transfer
(start of data transfer)
ON OFF 1 beep 2
Data Editing ON OFF - 3
FLASH ROM Clear ON OFF - 4
Writing to FLASH ROM ON OFF - 5
Download completed ON OFF 3 long beeps 1
Download error Blinks Blinks 1 long beep F