Satlink WS-6926, User Manual

Page: 16 / 16

THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|
27-Digital Satellite Meter Digital Satellite Meter-28
Signal compatibility
Support conversion for different video formats
Video Format
4:3,16:9,By Pan & Scan and Letter
Box conversion
Audio output mode Stereo, Mono,R/L
DATA SERVICE PORT
Connector
USB
Data protocol
USB2.0 interface
File management system
NTFS,FAT32,FAT16
file format
wma,mp3,mp4,avi,jpg,jpeg,bmp,img
MICROPROCESSOR
Microprocessor Amlogic
Clock Frequency
180MHz
SDRAM Memory
512Mbit
Power SUPPLY
Li_Ion Battery 8.4V/3000mAh
Adapter
OUTPUT :DC12V/1.5A,
INTUPT :100-240VAC 50/60Hz
Power consumption
Max. 10W
PHYSICAL CHARACERSTICS
Size (W x D x H)
3
95x155x45(mm )
Net Weight
0.5KG
6Trouble Shooting
Problem Possible Causes What To Do
No display light up
Power switch is not on
Run out of batteries
Check to make sure power
on. Even on adapter. Press
B.light key
No sound or picture,but
the front panel power
light is ON.
AV IN jack insert,
but no video input
Pull out AV IN cable
No sound or picture
Adjust the dish. Check
the Signal Level in the
Antenna Setup Menu
The satellite dish is not
pointing at the satellite.
No signal or weak signal
Check the cable connections.
LNB and other equipment
connected between the LNB
and the meter and adjust the
dish.
The satellite dish in not
pointing at the satellite
Adjust the dish.
Signal is too strong
Connect a signal attenuator
to the LNB input
Satellite dish is too small
Change to a larger dish
Bad picture
/Blocking Error
AV out No picture(Video)
The system is connect-
ed by SCART cable and
TV is not in AV mode.
ChecktheUHFchannel,
fixed in your system and
turn the UHF properly.
The key is not working
Out of battery Even on adapter
make sure no blocks
between the front panel
Key blocks
Note: If you still cannot resolve the problem with the above
references. Please contact the local dealer or their aftersales
service center.
LNB noise factor too high.
Change to an LNB with
lower noise factor
The LNB is faulty.
Change the LNB