PN 22541 REV B - 6 - 5/18
Rivet panels (left / right / rear) together in rear corners
:
Install lift handles on side panels:
12) Rivet panels (left / right / rear) together
in rear corners. Left corner
(rear panel
overlaps left side panel)
. Right corner
(right side panel overlaps rear panel
).
13) Rivet panels (left / right / rear)
together in rear corners. Use (8) rivets
per corner P/N 11054 from outside of
panel & (8) washers per corner P/N
11315 inside unit on rivet.
14) Drill at 6 dimple locations near rear
corners of left / right side panel using a
1/4” (.250”) [ 6 mm] Drill bit.
15) Use (6) screws PN 18718 with (6) washers PN 11360 on
inside of side panel, through 6 holes in side panel for mounting
lift handle.
16) Place lift handle PN 22522 on outside of panel with screws
PN 18718 through holes in handle. Install (6) washer PN
12382 & (6) nuts PN 16307 on screws using # 3 Phillips Head
Driver Bit & 7/16” (.437”) [11.1 mm] socket or socket driver bit.
Install paperguard:
17) Drill out 4 marks (“0”) in left
panel from inside unit using a drill
with a ¼” (.250”) [6 mm] drill bit,
at location shown below.
18) Install paperguard PN 22209 with (4) rivets PN
11054 outside of panel and (4) washers PN
11315 inside of unit on rivet.
19) Insert the spindle PN 22310 into
the paperguard. Note: position of the
hook.
