SATELLINE-EASy / SATELLINE-EASy 869
User Guide, Version 3.0
41
LCD Write Lock
OFF (Normal use) allows the user to read and modify the settings
via push buttons and LCD display.
ON (Read-only) allows the user to read the settings but the
modifications are not allowed via push buttons.
Default value: OFF
Add RSSI to data
If the function is ON, RSSI information is appended to the
received data.
Default value: OFF
Region Code
Region code defines the regional settings that firmware uses.
US: Starting from the 1st of Jan 2013 FCC regulations state, they
will allow transmission on 25 kHz radio channels only if the link
rate of the radio is at least 19200 bps.
In case Region code is set to US and the active setup violates the
above mentioned FCC requirement, the radio modem cuts the
transmitter power level to zero (0 W) when transmitting. The radio
modem is ensuring it is operating according to the FCC
requirement.
Default value: No regional settings defined.
Routing
See the chapter MESSAGE ROUTING
Default value: Routing mode OFF
Tests
Set ON/OFF
Default value: OFF
Customer Info 1
Any arbitrary text (max. 32 characters) can be saved in the setting
for identification purposes etc.
Customer Info 2
Any arbitrary text (max. 32 characters) can be saved in the setting
for identification purposes etc.
Customer Info 3
Any arbitrary text (max. 32 characters) can be saved in the setting
for identification purposes etc.
