SATELLINE-EASy / SATELLINE-EASy 869
User Guide, Version 3.0
48
10.3
How to modify the settings on LCD
After pressing
SETUP
button (
) on the top level view, the list of settings sub-menus appears.
The cursor (>) indicates the active line or the current value of the setting.
Pressing
DOWN
(
▼
) button the cursor moves downwards.
Depending on the sub-menu, the button also scrolls the digits of
numerical values when changing some settings.
Pressing
UP
(
▲
) button the cursor moves upwards. Depending
on the sub-menu, the button also scrolls the digits of numerical
values when changing some settings.
Pressing
SELECT/SET/CHANGE/NEXT/YES
(
) button either
confirms a selection, sets or changes a value, moves to the next
digit or enters a sub-menu depending on the context.
Pressing
EXIT/CANCEL/BACK/NO
button escapes back to the
previous higher level in the menu hierarchy or cancels the
modification of a setting depending on the particular submenu.
10.3.1
Saving the modified settings
After all the desired modifications are done the settings need to be saved in order to make them
permanent (until the next modification). This is accomplished by choosing ”EXIT” on the top level
menu. LCD prompts a message asking a confirmation of the modified configuration.
By choosing ”YES” the configuration is saved into the non-volatile
memory inside the radio modem.
By choosing ”NO” the modified settings are cancelled and
previous settings remaining in the non-volatile memory.
