CA-4v1 SATEL
5
Description of the LED keypad
Sound signals produced by the keypad
a) While working with the keypad the following sounds may be generated:
1 short
–
key pressed confirmation,
2 short
–
correct access code entry confirmation before function number
selection,
3 short
–
confirmation of the successful completion of an operation (for example
arming/disarming of the system, function selection, successful
programming completion),
2 long
–
error signal (for example: wrong password, entering wrong key
sequence, exiting the function programming session without saving the
parameters through depressing a key).
b) The remaining situations (the sound signal is repeated every second):
1 short
–
the entry delay time countdown,
2 short
–
the panel detected a trouble –
[TROUBLE] LED is on (sound signal
can be temporary switched off by pressing the [*] key; signaling will be
activated automatically after a new trouble event occurs)
3 short
–
alarm signalling (active till cancelled through the keypad),
Cautions:
•
the entry delay time countdown is signaled after activating the function (see
ADDITIONAL FUNCTIONS),
•
in armed mode trouble sound signalling is not active.
LED signaled states
ALARM (red color) – alarm is signaled by the LED blinking. The LED goes out after
alarm reset. (see Disarming, Cancelling alarm).
ARMED (green color) – the LED is ON with the system armed. The blinking LED
indicates the countdown of the exit delay time.
Figure 5. View of a LED Keypad
