Satel ACU-120, Manual, Page: 13 / 28

SATEL ACU-120 11
7.2.1 Work with the INTEGRA / INTEGRA Plus control panels
The number of supported wireless devices depends on the control panel.
When adding and removing the wireless devices, remember that the identification function
registers zones and outputs by groups of 8. Already after adding one wireless device which
takes up 1 zone, the control panel will reserve 8 zones in the system for wireless devices.
The LCD keypad makes it possible to select the zone to which that device will be assigned.
Observe continuity, i.e. avoid leaving any gaps in the list, which will later reduce the number
of available zones in the system. Remember to preserve continuity also when removing
wireless devices. For example, if the devices registered in the controller occupy 9 positions
on the list, then 16 zones (2x8) are reserved in the system. After removal of the device which
occupied position 7 on the list, there will still be 16 zones (2x8) reserved in the system for
wireless devices, although 8 positions are actually taken up on the list of wireless devices
(see: Table 2). In such a case, it is recommended that the last devices be removed from the
list and then added to the system again, so as to fill up the gap in the list and reduce the
number of zones reserved for wireless devices.
INTEGRA / INTEGRA Plus
ACU-120
zones outputs
It.. list of devices No device No device
1 APD-100 detector 17 APD-100 detector 17 unused/unavailable
2 APD-100 detector 18 APD-100 detector 18 unused/unavailable
3 AMD-100 detector 19 AMD-100 detector 19 unused/unavailable
4 AMD-100 detector 20 AMD-100 detector 20 unused/unavailable
5 AMD-101 detector 21 AMD-101 detector 21 unused/unavailable
6 ^ 22 AMD-101 detector 22
unused/unavailable
7 23 unused/unavailable 23
unused/unavailable
8 ASP-105 siren
8
24 ASP-105 siren 24 ASP-105 siren
9 ^ 25 ASP-105 siren 25 ASP-105 siren
10 26 unused/unavailable 26
unused/unavailable
11 27 unused/unavailable 27
unused/unavailable
12 28 unused/unavailable 28
unused/unavailable
13 29 unused/unavailable 29
unused/unavailable
14 30 unused/unavailable 30
unused/unavailable
15 31 unused/unavailable 31
unused/unavailable
16
8
32 unused/unavailable 32
unused/unavailable
Table 2. An example of how the wireless devices should not be registered. For devices taking
up 8 positions, the system must reserve 16 zones and 16 outputs, as well as 2 addresses.
INTEGRA / INTEGRA Plus
ACU-120
zones outputs
It. list of devices No device No device
1 ASP-105 siren 17 ASP-105 siren 17 ASP-105 siren
2 ^ 18 ASP-105 siren 18 ASP-105 siren
3 APD-100 detector 19 APD-100 detector 19 unused/unavailable
4 APD-100 detector 20 APD-100 detector 20 unused/unavailable
5 AMD-100 detector 21 AMD-100 detector 21 unused/unavailable
6 AMD-100 detector 22 AMD-100 detector 22 unused/unavailable
7 AMD-101 detector 23 AMD-101 detector 23 unused/unavailable
8 ^
8
24 AMD-101 detector 24 unused/unavailable
Table 3. An example of how to correctly register the wireless devices (compare also Fig. 4).
For 8 devices, the system has reserved 8 zones and 8 outputs, as well as 1 address.