132
EN
Operating instructions
SATAjet K 1800 spray mix
Dismantle the pre-nozzle, paint needle and paint needle tappet
■
Actuate the trigger guard
[1-7]
to remove prestressing between the
hard metal ball of the paint needle
[7-5]
and the pre-nozzle
[7-4]
.
■
Unscrew the pre-nozzle
[7-4]
using the SATA universal spanner.
■
Bring the trigger guard
[1-7]
to the starting position.
■ Unscrew the end screw (spanner size 6)
[7-9]
.
■
Remove both springs
[7-7]
and
[7-8]
.
■
Pull the paint needle tappet
[7-6]
right back as far as it will go.
This pulls the paint needle tappet
/
[2-2]
off the paint needle
[7-5] /
/
[2-
1]
.
■
Take the paint needle tappet
[7-6]
backwards out of the gun body
[1-4]
.
■
Take the paint needle forwards out of the gun body.
Mount the pre-nozzle, paint needle and paint needle tappet
Note!
Damage from incorrect installation sequence
The components can be damaged if fitted in the wrong order.
→
Heed correct installation sequence.
■
Insert the paint needle
[7-5]
in the gun body
[1-4]
carefully from the
front and push right to the back.
■
Push the paint needle tappet
[7-6]
carefully into the gun body from be-
hind and push onto the paint needle
/
[2-1]
until the paint needle tappet
[2-2]
engages on the paint needle.
■
With the engaged paint needle, push the paint needle tappet forwards
as far as it will go into the groove of the packing bolt.
■
Screw in the new pre-nozzle
[7-4]
using the SATA universal spanner.
■
Insert the spring
[7-7]
in the paint needle.
■
Position the spring
[7-8]
on the end screw
[7-9]
.
■
Screw the end screw
in as far as it will go.
Mount the material nozzle
■
Insert the material nozzle
[7-3]
in the air cap
[7-2]
. Pay attention to the
groove alignment with the fixing pin.
■
Position the air cap ring with contact protection
[7-1]
together with the
air cap and material nozzle, then screw on by hand.
10.2. Replace trigger guard
Remove trigger guard
■ Unscrew the fastening screw (TX 20)
[8-1]
and remove with the wash-
Manual_SATAjet-K-1800-spray-mix 26-sprachig.indb 132
Manual_SATAjet-K-1800-spray-mix 26-sprachig.indb 132
29.10.2021 13:54:01
29.10.2021 13:54:01
