![background image](http://html.mh-extra.com/html/sata/02003/02003_user-manual_1200242017.webp)
中文
EN
DE RU KO PT JA ES
02003
17
1. Safety Instructions
Warning:
The definitions of "Warning" and "Caution" in the Operation Instructions are as follows:
Warning: Improper use may result in death or serious injury.
Caution: Improper use may result in injury of the user or substantial damage to the objects involved.
Note: The information described is important for the operation of the machine.
Caution:
When the power is turned on, the temperature of the soldering bit is high. Considering the possibility of scalding or
fire caused by misuse, strictly follow the requirements below:
1
)
Use this product in accordance with the Operation Instruction, and avoid misuse.
2
)
Use this product at rated voltage and frequency
(
see the label on the back of the machine
)
.
3
)
Do not touch the soldering bit and the metal parts around it.
4
)
Do not use the soldering bit near flammable objects.
5
)
Inform others that the soldering bit is likely to cause burns and dangerous accidents. Turn off the power
before resting or after work.
6
)
When replacing the parts or the soldering bit, turn off the power and cool the soldering bit down to room
temperature before replacement.
7
)
Check, maintain and repair this product regularly. Do not use this product when it is damaged, especially when
the power cord is damaged.
8
)
This product is provided with a three-wire grounding plug, which shall be plugged into a three-pin earthing
socket. Do not modify the plug or use an ungrounded three-pin adapter, so as to avoid improper grounding.Use
grounded three-wire power cords to extend the wire.
9
)
Do not knock the station with the soldering iron handle to remove residual flux, as this may severely damage
the handle assembly and the soldering bit.
10
)
Do not use the soldering bit for other works than soldering.
11
)
Do not wet the soldering station. Do not use and disassemble the soldering station or pull the power cord when
your hands are wet.
12
)
Equip the workshop with good ventilation facilities because smoke will be produced during soldering.
13
)
Do not modify the soldering station without authorization. Always use original parts for replacement.
14
)
Do not use or store this product within the reach of children.