Sartorius TopMix2.Touch TM02-X, Operating Instructions Manual

Page: 11 / 41

Operating Instructions TopMix 11
t
The terminal/control panel (TM02-X) can also be attached to the wall.
Attach the bracket using the 4 screws. For drilling template, see chapter
Scale Drawings (Dimensions).
When mounting the terminal/control panel on the wall, the mounting surface
and fasteners must be capable of supporting a minimum weight of 40 kg.
The fasteners can withstand a force up to four times greater than the weight of
the device.
Make sure you use the appropriate fasteners/accessories and tool.
Installing the Ex-Link Converter (YCO12-Z)
4. Insert the TopMix ex-link cable YCC01-0049M20 (length: 20 m) into the ex-link
converter (YCO12-Z) (Ex side). Tighten the safety screws firmly.
5. USB port:
Insert TopMix PC USB cable (YCC01-0040M3) for connecting a standard PC to
the ex-link converter outside the potentially explosive area (PC side), length: 3 m.
6. Insert the connecting cable (DVI video cable YCC01-0051M3) for connecting
a standard PC to the ex-link converter outside the potentially explosive area
(PC side), length: 3 m. Tighten the safety screws firmly.
7. Option to connect a monitor (inspection monitor) outside of the potentially
explosive area (PC side).
8. Connect the device to power supply (PC side).
Follow all warnings and safety precautions.
The ex-link converter (YCO12-Z) can also be attached to a wall or under a table.
Installing the TM02-X Terminal/Control Panel