Sartorius TopMix2.Touch TM02-X, Operating Instructions Manual

Page: 5 / 41

Operating Instructions TopMix 5
Intended Use
Intended Use
The Sartorius TopMix2.Touch has been designed for use in paint-mixing applications. It consists of an operator
terminal (TM02-X, monitor and touch screen) and an ex-link converter (YCO12-Z) which is installed outside the
potentially explosive area. They are both linked together by the special 20 m cable provided.
The TM02-X is used in potentially explosive areas. An explosion-protected, intrinsically safe scale can be
connected to the TM02-X. The intrinsically safe TopMix2.Touch keyboard YKB01TM-X may optionally be
connected to the TM02-X terminal/control panel.
A PC may be connected to the ex-link converter (YCO12-Z) outside the potentially explosive area using a DVI
video and USB cable.
The scale connected to the TM02-X can be controlled by the user's software installed on the PC.
The process data are visible on the TM02-X DVI display at all times during mixing. A test monitor may also be
connected to the ex-link converter (YCO12-Z) outside the potentially explosive area.
Make sure to read and store these installation instructions carefully before installing and operating your
TopMix paint-mixing weighing system.
The TM02-X terminal/control panel may not be used as a standard office PC.
Safety Precautions
Legal Information
This device meets stipulated safety requirements. Improper use or handling, however, can result in damage
and/or injury.
The manufacturer is not responsible for any damage caused by non-compliance with warnings or safety
instructions.
– The requirements pertaining to applicable installation regulations must be followed when using electrical
equipment in systems and environmental conditions with increased safety requirements.
The use of the terminal/control panel and the ex-link converter (YCO12-Z) is not permitted in legal metrology
or in medical areas or potentially explosive areas containing dust or explosive materials.
– The intrinsically safe terminal/control panel and the ex-link converter (YCO12-Z) have been manufactured in
accordance international standards (see certificates in the appendix).
The TopMix can be operated with intrinsically safe Sartorius scales in the hazardous area/location, e.g.:
PMA7501-X (see: “Verification of Intrinsic Safety", drawing number 36942-751-60, for ATEX and “Control
drawing”, drawing number 36942-751-07, for Canada and the USA).