manualshive.com logo in svg

Sartorius Midrics 1, Operating Instructions Manual

Share
Download
Sartorius Midrics 1 Operating Instructions Manual Download Page 81

The weighing platform is tared
and the component counter
value is increased by one.
Prompt to fill and save the
second component is shown.

5. Add the second component 

to the container 
(in this example, 525 g)

The weight of the second
component is displayed

O

6. Store the weight of the third

component

0.525 kg

The component weight is
printed automatically

The weighing platform is tared
and the component counter
value is increased by one.
Prompt to fill and save the
third component is displayed.

w

7. Toggle to the “additive mode"

to view the total weight of all
components.

The value displayed equals 
the weight of all components
added up to now plus the 
current weight.

8. Add the third component to

the container, bringing the
total up to the desired target
(in this example, 2000 g).

The total weight is displayed

O

9. Store the weight of the third

component

0.375 kg

The component weight 
is printed automatically

The component counter 
value is increased by one.
Prompt to fill and save 
a fourth component is shown.

c

10. End weighing-in operation

Results are printed 
automatically (configured
total printout)

n

+

3

Number of components

Tot.cp+

2.000 kg

Contents of component
memory

Cont.T+

0.296 kg

Content of tare memory 
(container weight

-------------------

81

Application: Net-total Formulation 

R

Summary of Contents for Midrics 1












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands