Inserting a Glass Fiber Pad
§
Open the cover
§
Use the forceps to place the glass fiber pad on the sample retainer.
§
Make sure the pad is level.
Removing a Glass Fiber Pad
Note:
Immediately following analysis, the sample chamber and the sample are still hot.
To avoid injury, observe the warnings and safety precautions included in these
instructions.
When analyzing samples that can be deemed hazardous, protective goggles, clothing and
gloves must be worn when opening the analyzer cover after analysis.
§
Open the cover.
§
Use the forceps to grasp the glass fiber pad and carefully remove it from the
sample chamber.
Replacing the Printer Paper
§
Press down briefly on the cover of the
printer compartment and release.
§
Slide the cover towards the back of the
analyzer.
34
§
Raise the cover and remove it.
§
Place the new paper roll on the spindle
as illustrated above and place it in the
printer compartment.
§
Release the locking mechanism.
§
Guide the printer paper under the roller.
§
Reset the locking mechanism.
§
Guide the end of the paper roll through
the slot on the compartment cover.
§
Position the cover.
§
Press down on the cover of the printer
compartment.
$
The printer compartment closes.
Summary of Contents for LMA200PM
Page 37: ...37 All dimensions given in mm Dimensions Scale Drawings...
Page 38: ...38...
